Technical Specifications for Indy Presenter(tm)

The Flat Panel Display is a 12.1" full color active matrix LCD display with stereo speakers and overhead projection capability.

Electro-Optical

1024(x3 RGB stripe)x768

Color Resolution: 15-bit and 18-bit modes, user selectable

(12-bit True + Frame Rate Modulation)

Color Gamut: R: x=0.61, y=0.36, G: x=0.27, y=0.62, B: x=0.13, y=0.11

Contrast Ratio: 100:1, minimum

Brightness: 80Cd/m2, minimum (at a transmissivity of 3.1%)

Response Time: < or = 50ms, maximum, rise + fall

Viewing Angle: Horizontal = ±45 degrees, Vertical = +30/-10 degrees

(optimized for 12:00)

Display Surface: Front = Anti-glare 3H hardcoat, Rear = Clear 3H hardcoat

Video

Single width option connecting to the graphics board's video connectors generating 24-bit high resolution digital video to drive a flat panel display

Camera: Indy Video(tm) and Cosmo Compress(tm) are not available when IndyCam(tm) is supported by Indy

StereoView(tm) Goggles: Not supported

SimulScan: Not supported

Audio

Serial digital stereo (IEC958, AES3)

Output: Stereo: .6W per channel, 150Hz to 18KHz

Microphone: Provided by the Indy mono/stereo microphone

Control

IC interface supports control of speaker volume, backlight brightness, tone, and stereo

Power Requirements

30 watts AC plus 10 watts @ 5VDC for Indy adapter card

Source: 110/220 VAC 50-60Hz

Cabling

Ten-foot, shielded, 34 twisted pair conductors, internal connector at display end with separate audio plug at system end

Power: IEC socket with removable 10' cable to wall outlet

Physical

Display: 12 3/4"H x 12 1/2"W x 7/8"D
Base: 6 1/2"H x 12 1/2"W x 1 1/8"D

Total length folded flat: 18 1/2"

Weight: 7 lbs.

Color: Gray Granite

Hinge: Friction/clutch with 210¡ rotation

Backlight: User-removable light pipe assembly for use with custom OHP

Carrying Cases: Standard Indy Flat Panel carrying case includes pocket for Corona and cables

Desktop Stand: Integral base supports desktop use at 0 to 30 degree tilt

Operating Conditions

13 to +35 degrees C in direct view and OHP modes

Relative Humidity: 10% to 80%RH (no condensation)

Non-Operating Conditions

-20 to +60 degrees C

Relative Humidity: 5% to 90%RH (no condensation)

Vibration: 0.02", 5-19Hz; 35G, 5-500Hz

Shock: (20G, 11ms, half sine wave X, Y, Z)

Software

Indy PROM includes Corona monitor ID and timing (early Indy production may require PROM upgrade)

System Software: Requires IRIX(TM) 5.2 or later

Software Control Panels:

Audio panel controls volume, tone and fade.

Display panel controls backlight brightness

Master Volume: Master volume controlled via Indy front panel switches

Regulatory

FCC Class A, Canada DOC Class A, CISPR 22 Class A, Germany VDE Class A, VCCI Class 1

Product Safety: UL 1950, CSA 22.2 (#950), IEC 950, EN 60-950

Ergonomic/Health: Germany ZH618

Overhead Projector Option

Dukane MagniView Model 28A681

Operating Modes: Latches on top of projector locate and mount Presenter unit whose base is hinged to conform to projector front face; shows standard slides when Presenter not installed

Optical: Combined 3-element standard/wide-angle projection lens

Projected Screen Size: 3.5-foot diagonal to over 30-foot diagonal in suitably lighted environment

Brightness: 6,000 lumens from 575 watt metal halide source

Electrical: 120V, 60Hz Power Operation or 220/240, 50/60Hz

Universal auto switching power supply for 47-63Hz, 90-250v