---------------------------------------------------------------------------
   M i n e r v a   S o f t w a r e   T e c h n i c a l   R e l e a s e

   Number: 011/SCSIFS                                      Minerva House   
   Date:   19/02/90                                      Baring Crescent
   Author: SC                                              Exeter, Devon
   Pages:  01                                                    EX1 1TL     

            Using Minerva products on SCSI Hard Disc drives
---------------------------------------------------------------------------

When using some Minerva Products such as System DeltaPlus, GammaPlot or
SigmaSheet from a SCSI hard disc you may come across some problems. 

To use one of these programs on a hard disc, you should have a RISC OS
machine. If your program is pre v2.00 you should make a backup and convert
it using the RISC OS support disc. The software may be copied to the hard
disc as follows (use the desktop drag mechanism to copy the files):

Copy the contents of the LIBRARY directory to the LIBRARY directory on
the SCSI hard disc. If you do not have a LIBRARY directory on your hard disc
you should create one using the 'New Directory option' from the desktop.
Copy everything else wherever you like.

The most common problem is say where you get the error message 'Module must
be on the disc'. This means that that the program you are using has not been
able to find the modules that it requires.

To cure this problem you should try the following.

Configure the Filing system to SCSI, and the drive to :4 with the
following commands:

*CONFIGURE FileSystem SCSIFS
*CONFIGURE Drive 4

Then press Ctrl and Break and try again. If it still doesn't find the
modules, you should make sure that the LIBRARY is configured correctly by
typing:

*LIB :4.Library



--01---011/SCSIFS----------------------------------------------------------