BusLogic BT-445S

This is the BusLogic 445S SCSI adapter shown. Listed below are the possible Interrupt Request Line (IRQ), Base I/O Address, Base Memory Address, and other jumper/switch configurations:

	
Setup Choice for Windows NT 3.5
BusLogic Family

Type of External SCSI Connector
High Density Shielded

Switch Bay 1

SCSI
ID	S1	S2	S3
0	OFF	OFF	OFF
1	ON	OFF	OFF
2	OFF	ON	OFF
3	ON	ON	OFF
4	OFF	OFF	ON
5	ON	OFF	ON

6	OFF	ON	ON
7	ON	ON	ON

SCSI Parity	S4

Disable	        OFF
Enable	        ON


More than
1Gb Support	S5

Disable  	OFF
Enable	        ON


Synchronous
Negotiation	S6

Disable	        OFF
Enable	        ON


SCSI

Transfer Speed	S7
10 Mb/Sec	OFF
5 MB/Sec	ON


VL-Bus

Clock Speed	S8	S9	S10
20 MHZ	        ON	ON	OFF
25 MHZ	        OFF	ON	OFF
33, 40 MHZ	ON	ON	ON
50 MHZ	        ON	OFF	ON
DX2/50 MHZ	OFF	ON	OFF
DX2/66 MHZ	ON	ON	ON


Switch Bay 2

I/O Address	S1	S2	S3
Reserved	OFF	OFF	OFF
134h-137h	ON	OFF	OFF
234h-237h	OFF	ON	OFF
334h-337h	ON	ON	OFF
Reserved	OFF	OFF	ON
130h-133h	ON	OFF	ON
230h-233h	OFF	ON	ON
330h-333h	ON	ON	ON

Bios
Address	S4	S5
0C8000h	OFF	OFF

Disable	ON	OFF

0D8000h	OFF	ON
0DC000h	ON	ON


Host Interrupt
Channel	        S6	S7	S8
Reserved	OFF	OFF	OFF
Reserved	ON	OFF	OFF
15	        OFF	ON	OFF
14	        ON	ON	OFF
12	        OFF	OFF	ON
9	        ON	OFF	ON
10	        OFF	ON	ON
11	        ON	ON	ON


S9	Reserved
S10	Reserved

JUMPERS

Host Interrupt
Channel	W3	W4	W5	W6	W7	W8

15	ON	OFF	OFF	OFF	OFF	OFF
14	OFF	ON	OFF	OFF	OFF	OFF
12	OFF	OFF	ON	OFF	OFF	OFF
11	OFF	OFF	OFF	ON	OFF	OFF
10	OFF	OFF	OFF	OFF	ON	OFF
9	OFF	OFF	OFF	OFF	OFF	ON


Floppy
Controller	W15	W16

Enable    	ON	ON
Disable  	OFF	OFF


Floppy

Address	W14
3FX	OFF
37X	ON

Zurück zur Übersicht