Adaptec 1740A/1742A

This SCSI interface card can be configured using the software supplied by the manufacturer. Please consult the documentation that came with your SCSI interface card or contact the manufacturer of the SCSI interface card for further information.

	

Setup Choice for Windows NT 3.5
Adaptec 174x

Type of External SCSI Connector
High Density Shielded

Note1: The only manually configurable jumpers are documented on the illustration above.  Terminators are RN5, RN6, and RN7.  
Remove if the adapter is not the first or last device on the SCSI bus.


Note2: - The 1744 is a differential controller.  While the firmware & BIOS are the same as that of the 1740/1742, the electrical 
interface is different.  It should NEVER be connected to any single ended SCSI devices as you may damage either the host adapter 
or your SCSI devices.

Note3: - The 1740A must be configured for 5 MB/second asynchronous I/O to work with listed CD-ROM drives from Chinon, Hitachi 
and NEC.

Zurück zur Übersicht