UltraStor 34F

This is the UltraStor 34F SCSI adapter shown. Listed below are the possible Interrupt Request Line (IRQ), Base I/O Address, Base Memory Address, and other jumper/switch configurations:

	

Setup Choice for Windows NT 3.5
UltraStor 14f, 34f

Type of External SCSI Connector
High Density Shielded

JP3 (JUMPER BLOCK 1)


MOTOR SPIN UP SEQUENCING	J1-2
DEVICE AUTO SPIN UP		OFF
SEQUENTIAL SPIN UP		ON



SYNC NEGOTIATION	J3-4
HOST ADAPTER INITIATED	OFF
TARGET INITIATED	ON


IRQ	J5-6	J7-8
10	ON	ON
11	ON	OFF
14	OFF	ON
15	OFF	OFF

J9-10	SCSI Parity Enable/Disable

BIOS
SEGMENT		J11-12	J13-14	J15-16
DISABLE		OFF	OFF	OFF
C4000-C7FFF	OFF	OFF	ON
C8000-CBFFF	OFF	ON	OFF
CC000-CFFFF	OFF	ON	ON
D0000-D3FFF	ON	OFF	OFF
D4000-D7FFF	ON	OFF	ON
D8000-DBFFF	ON	ON	OFF
DC000-DFFFF	ON	ON	ON

JP4 (JUMPER BLOCK 2)

MAILBOX PORT

I/O BASE ADDRESS	J1-2	J3-4
330H			OFF	OFF
340H			OFF	ON
230H			ON	OFF
130H			ON	ON



NUMBER OF HARD DRIVES		J5-6
2 (MAX) HD PER SYSTEM		OFF
7 (MAX) HD PER HOST ADAPTER	ON


HEAD MAPPING MODE		J7-8	J9-10
16 HEAD; 63 SECTOR MAPPING	OFF	OFF
64 HEAD; 32 SECTOR MAPPING	OFF	ON
64 HEAD; 63 SECTOR MAPPING	ON	OFF
64 HEAD; 32 SECTOR MAPPING	ON	ON

SCSI
ID	J11-12	J13-14	J15-16
0	OFF	OFF	OFF
1	OFF	OFF	ON
2	OFF	ON	OFF
3	OFF	ON	ON
4	ON	OFF	OFF
5	ON	OFF	ON
6	ON	ON	OFF
7	ON	ON	ON

Zurück zur Übersicht