Olivetti GO579 (EFP-2)

This is the Olivetti EFP-2 SCSI adapter shown. Listed below are the possible switch settings for the adapter:

	

Setup Choice for Windows NT 3.5
Olivetti ESC-1/ESC-2

Type of External SCSI Connector
High Density Shielded

Note1: - This adapter is currently supported in its ESC-1/ESC-2 compatibility mode only.

Note2: - This adapter is a RAID controller which supports hard drives only.

SW1
S1 	S2	S3	S4	S5	S6	S7	S8	Description

ON							OFF	SCSI channel 1 ID7 (for Mono Host)
OFF							OFF	SCSI channel 1 SCSI ID6 (for Dual Host)
	ON						OFF	SCSI channel 2 ID7 (for Mono Host)
	OFF						OFF	SCSI channel 2 ID6 (for Dual Host)
		ON	OFF	OFF			OFF	Channel 1 Single Mirroring 0 pairs (no mirroring)
		ON	ON	OFF			OFF	Channel 1 Single Mirroring 1 pair
		ON	OFF	ON			OFF	Channel 1 Single Mirroring 2 pairs
		ON	ON	ON			OFF	Channel 1 Single Mirroring 3 pairs

		ON			OFF	OFF	OFF	Channel 2 Single Mirroring 0 pairs (no mirroring)
		ON			ON	OFF	OFF	Channel 2 Single Mirroring 1 pair
		ON			OFF	ON	OFF	Channel 2 Single Mirroring 2 pairs
		ON			ON	ON	OFF	Channel 2 Single Mirroring 3 pairs
		OFF	ON	OFF	OFF	OFF	OFF	Dual Mirroring 1 pair
		OFF	OFF	ON	OFF	OFF	OFF	Dual Mirroring 2 paris
		OFF	ON	ON	OFF	OFF	OFF	Dual Mirroring 3 pairs
		OFF	OFF	OFF	ON	OFF	OFF	Dual Mirroring 4 pairs

		OFF	ON	OFF	ON	OFF	OFF	Dual Mirroring 5 pairs
		OFF	OFF	ON	ON	OFF	OFF	Dual Mirroring 6 pairs
X	X	X	X	X	X	X	ON	Diagnostic Mode
OFF	OFF	OFF	OFF	OFF	OFF	OFF	OFF	Configuration not allowed

Zurück zur Übersicht