Future Domain TMC-845

This is the Future Domain TMC-845 SCSI adapter shown. Listed below are the possible Interrupt Request Line (IRQ), Base I/O Address, Base Memory Address, and other jumper/switch configurations:

	

Setup Choice for Windows NT 3.5
Future Domain 8xx

Type of External SCSI Connector
25-Pin (Labeled SCSI or APPLE SCSI)

Note1: - To use this adapter, at least one device on the bus must provide termination power.

Note2: - Refer to SETUP.TXT for information on configuring this adapter.


ADDRESS	W1	W2
CA00H	OFF	OFF
C800H   OFF	ON
CE00H	ON	OFF
DE00H	ON	ON

IRQ	W3	CENTER	        W4
		POST
3	ON	ON		OFF
5	OFF	ON		ON

The remaining settings for this SCSI interface card can be configured using the software
supplied by the manufacturer. Please consult the documentation that came with your SCSI 
interface card or contact the manufacturer of the SCSI interface card for further information.

Zurück zur Übersicht