Future Domain MCS-600

This is the Future Domain MCS-600 SCSI adapter shown. Listed below are the possible Interrupt Request Line (IRQ), Base I/O Address, Base Memory Address, and other jumper/switch configurations:

	
Setup Choice for Windows NT 3.5

Type of External SCSI Connector
25-Pin "Apple SCSI"

Note1: - This Pioneer DRM-600 CD-ROM drive is not supported for use with the Future Domain
MCS-600 adapter.

W4
Termination Power Enable/Disable


The remaining settings for this SCSI interface card can be configured using the software
supplied by the manufacturer. Please consult the documentation that came with your SCSI 
interface card or contact the manufacturer of the SCSI interface card for further information.

Interrupt Request Line (IRQ)
Default - IRQ5

Base I/O Address
Default - 140h

Base Memory Address
Default - CA00h

Zurück zur Übersicht