BusLogic BT-747S/747D

Setup Choice for Windows NT 3.5
BusLogic Family

Type of External SCSI Connector
High Density Shielded

Note1: When using a Buslogic 747 SCSI adapter with an AST Manhattan SMP computer, you must disable the BIOS on the 
adapter. For more information on disabling the BIOS, refer to the adapter's documentation.
W8
Floppy enable/disable

BIOS Address
Default - DC00h 16K

I/O Port Address
Default - 330h


IRQ
Default - 11

SCSI ID
Default - 7

Adapter Sync
Default - OFF

Adapter SCSI parity checking
Default - ON

DMA Channel
Default - 5

Note - The BT-747S supports the single-ended SCSI interface with active termination.  The BT-747D supports the differential SCSI 
interface.

The remaining settings for this SCSI interface card can be configured using the software supplied by the manufacturer.  
Please consult the documentation that came with your SCSI interface card or contact the manufacturer of the SCSI interface card for 
further information.

Zurück zur Übersicht