BusLogic BT-742A

Setup Choice for Windows NT 3.5
BusLogic Family

Type of External SCSI Connector
Low Density Shielded

W8
Floppy enable/disable

The remaining settings for this SCSI interface card can be configured using the software supplied by the manufacturer.  
Please consult the documentation that came with your SCSI interface card or contact the manufacturer of the SCSI interface card for 
further information.

Note:  Terminators are RN2, RN3, and RN4.  Remove if the adapter is not the first or last device on the SCSI bus.


BIOS Address
Default - DC00h 16K

I/O Port Address
Default - 330h

IRQ
Default - 11

SCSI ID
Default - 7

Adapter Sync
Default - OFF

Adapter SCSI parity checking
Default - ON

DMA Channel
Default - 5

Zurück zur Übersicht