Cabletron E2100

This is the Cabletron E2100 Network Adapter card shown. Listed below are the possible Base I/O Address jumper configurations. IRQ is configured by software.:

	

Setup Choice for Windows NT 3.5
Cabletron E21XX Ethernet Adapter

Base I/O Address
	BASE I/O JUMPER BLOCK JP1
	1	2
220h	ON	ON
280h	ON	OFF
300h	OFF	ON
380h	OFF	OFF

Cabling for this Adapter

	Unshielded Twisted Pair via RJ-45 Connector
	Thin Ethernet via BNC Connector

Zurück zur Übersicht