SMC (WD) EtherCard PLUS Elite 16 Combo

This is the SMC (WD) EtherCard PLUS Elite 16 Combo Network Adapter card shown. Listed below are the possible Interrupt Request Line (IRQ), Base I/O Address, and Base Memory Address jumper/switch configurations:

	

Note1: - If the SOFT setting is chosen by the Jumpers on the adapter, run the Softset utility
         that comes with this adapter to choose the desired settings.

Setup Choice for Windows NT 3.5
SMC (WD) 8013EP /A

Interrupt Request Line (IRQ)
		W1
		J1	J2	J3
SOFTWARE	ON	OFF	OFF
IRQ3		OFF	ON	OFF
IRQ10		OFF	OFF	ON

Base I/O Address
		W1
		J1	J2	J3
SOFTWARE	ON	OFF	OFF
280h		OFF	ON	OFF
300h		OFF	OFF	ON

Base Memory Address
		W1
		J1	J2	J3
SOFTWARE	ON	OFF	OFF
D000h		OFF	ON	OFF
C000h		OFF	OFF	ON

Cabling for this Adapter

	Thick Ethernet via AUI Connector
	Thin Ethernet via BNC Connector
	Unshielded Twisted Pair via RJ-45 Connector

Zurück zur Übersicht