SMC (WD) EtherCard PLUS Elite

his is the SMC (WD) EtherCard PLUS Elite Network Adapter card shown. Listed below are the possible Interrupt Request Line (IRQ), Base I/O Address, and Base Memory Address jumper/switch configurations:

	T

Note1: - If the SOFT setting is chosen by the Jumpers on the adapter, run the Softset
         utility that comes with this adapter to choose the desired settings.

Setup Choice for Windows NT 3.5
SMC (WD) 8003E /A

Interrupt Request Line (IRQ)
	W1
	J1	J2	J3
SOFT	ON	OFF	OFF
IRQ3	OFF	ON	OFF
IRQ5	OFF	OFF	ON

Base I/O Address
	W1
	J1	J2	J3
SOFT	ON	OFF	OFF
280h	OFF	ON	OFF
300h	OFF	OFF	ON

Base Memory Address
	W1		
	J1	J2	J3
SOFT	ON	OFF	OFF
D000h	OFF	ON	OFF
CA00h	OFF	OFF	ON

Cabling for this Adapter

	Thick Ethernet via AUI Connector
	Thin Ethernet via BNC Connector