SMC (WD) EtherCard PLUS

This is the SMC (WD) EtherCard PLUS Network Adapter card shown. Listed below are the possible Interrupt Request Line (IRQ), Base I/O Address, and Base Memory Address jumper/switch configurations:

 	

	
Setup Choice for Windows NT 3.5

Interrupt Request Line (IRQ)
	W2
	J1	J2	J3	J4	J5	J6
IRQ2	OFF	OFF	OFF	OFF	OFF	ON
IRQ3	OFF	OFF	OFF	OFF	ON	OFF
IRQ4	OFF	OFF	OFF	ON	OFF	OFF
IRQ5	OFF	OFF	ON	OFF	OFF	OFF
IRQ6	OFF	ON	OFF	OFF	OFF	OFF
IRQ7	ON	OFF	OFF	OFF	OFF	OFF

Base I/O Address
	W1
	J1	J2	J3	J4
200h	ON	ON	ON	ON
220h	OFF	ON	ON	ON
240h	ON	OFF	ON	ON
260h	OFF	OFF	ON	ON
280h	ON	ON	OFF	ON
2A0h	OFF	ON	OFF	ON
2C0h	ON	OFF	OFF	ON
2E0h	OFF	OFF	OFF	ON
300h	ON	ON	ON	OFF
320h	OFF	ON	ON	OFF
340h	ON	OFF	ON	OFF
360h	OFF	OFF	ON	OFF
380h	ON	ON	OFF	OFF
3A0h	OFF	ON	OFF	OFF
3C0h	ON	OFF	OFF	OFF
3E0h	OFF	OFF	OFF	OFF

Base Memory Address
SOFTWARE CONFIGURABLE: Run the Softset utility that shipped with this adapter to configure Base Memory Address
Default - C400h

Cabling for this Adapter

	Thick Ethernet via AUI Connector
	Thin Ethernet via BNC Connector

Zurück zur Übersicht