Intel EtherExpress 16

The Intel EtherExpress 16 is software configurable and may be configured through Windows NT Control Panel, Network section. Please consult the installation instructions that came with your Network Adapter for more information.

	

Setup Choice for Windows NT 3.5
Intel Ether Express 16 LAN Adapter

Note1: - In some cases, selecting "early" in the I/O Channel Ready box can stop the network
         adapter card from functioning correctly and may require re-configuring with the Intel
         SoftSet utility. If you are unsure whether your system can take advantage of this
         network setting, consult your hardware vendor.


Cabling for this Adapter

	Thick Ethernet via AUI Connector
	Thin Ethernet via BNC Connector

or

	Thick Ethernet via AUI Connector
	Unshielded Twisted Pair via RJ-45 Connector

on the Intel EtherExpress 16TP

Zurück zur Übersicht