DEC Etherworks LC/TP

This is the DEC Etherworks LC/TP Network Adapter card shown. Listed below are the possible Interrupt Request Line (IRQ), Base I/O Address, and Base Memory Address jumper/switch configurations:

	

Setup Choice for Windows NT 3.5
DEC EtherWORKS Turbo/LC Adapter

Note1: - A DEC EtherWORKS Turbo /LC network adapter might use conflicting memory addresses,
         for example addresses might conflict with Adaptec or Future Domain SCSI adapters. 
         This requires re-configuring the hardware by changing jumpers.


Interrupt Request Line (IRQ)
	S8	S9	S10	S11	S12
IRQ2	ON	OFF	OFF	OFF	OFF
IRQ3	OFF	ON	OFF	OFF	OFF
IRQ4	OFF	OFF	ON	OFF	OFF
IRQ5	OFF	OFF	OFF	ON	OFF
IRQ7	OFF	OFF	OFF	OFF	ON

Base I/O Address
	S5
200h	OFF
300h	ON

Base Memory Address - 64K BUFFER
	S1	S2	S3	S4
C000h	OFF	ON	ON	ON
D000h	ON	ON	ON	ON
E000h	OFF	OFF	ON	ON

Base Memory Address - 32K BUFFER
	S1	S2	S3	S4
C800h	OFF	ON	OFF	ON
D800h	ON	ON	OFF	ON
E800h	OFF	OFF	OFF	ON

Cabling for this Adapter

	Thick Ethernet via AUI Connector
	Unshielded Twisted Pair via RJ-45 Connector

Zurück zur Übersicht