DEC DEPCA

This is the DEC DEPCA Network Adapter card shown. Listed below are the possible Interrupt Request Line (IRQ), Base I/O Address, and Base Memory Address jumper/switch configurations:

	

Setup Choice for Windows NT 3.5
DEC EtherWORKS DEPCA

Note1: - A DEC EtherWORKS DEPCA network adapter might use conflicting memory addresses, for
         example addresses might conflict with Adaptec or Future Domain SCSI adapters. This
         requires re-configuring the hardware by changing jumpers.


Interrupt Request Line (IRQ)
	W1	W2	W3	W4	W5
IRQ2	2-3	OFF	OFF	OFF	OFF
IRQ3	OFF	2-3	OFF	OFF	OFF
IRQ4	OFF	OFF	2-3	OFF	OFF
IRQ5	OFF	OFF	OFF	2-3	OFF
IRQ7	OFF	OFF	OFF	OFF	2-3

Base I/O Address
	W6
200h	OFF
300h	ON

Base Memory Address - 64K BUFFER (Rev. E Only)
	W7	W8
D000h	ON	ON
E000h	OFF	ON

Base Memory Address - 32K BUFFER (Rev. E Only)
	W7	W8
C800h	OFF	OFF

D800h	ON	OFF

Base Memory Address - 64K BUFFER (Rev. D Only)
	W7
D000h	ON
E000h	OFF

Cabling for this Adapter

	Thin Ethernet via BNC Connector

Zurück zur Übersicht