Product: Lightwave Revs: 5.0

Platforms: MAC

Problem: After Installation LightWave works fine, but Modeller will not launch.


SOLUTION: The Installer does not install all the required extensions in your System Folder.

Copy the 'QuickDraw 3D RAVE' extension from the CDROM's Extensions Folder(path = [CDROM][NewTek][System Files][Extensions] into your Systems Extensions Folder (path = [HARD DISK][System Folder][Extensions]) and restart your Mac.

---

Amiga

Intel

MIPS

Alpha

Macintosh

SGI

MAIN INDEX