Flyer LED Codes

Product: Flyer

Platforms: 2000 3000 3000T 4000 4000T

(older versions of the software)

(As viewed just below DIP switches) These patterns' diagnoses are valid only if Flyer Initialization hangs. If instead, it returns with an error code, refer to Flyer Initialization error summary for a failure diagnosis. Pattern Diagnosis

   1  2  3  4  5  6  7  8

   -  -  x  -  -  -  -  -  Flyer autobooted properly



   -  -  x  -  -  -  -  -  FlyerInit failed to open dos.library, get lock on specified directory,or failed to find flyer.bin


   -  -  -  -  -  -  -  -  Flyer software running on 68000, command failure



   x  -  x  -  -  -  -  -  Hung loading SK.bin



   -  x  x  -  -  -  -  -  Hung configuring skew FPGA



   x  x  x  -  -  -  -  -  Hung loading TR.bin



   -  -  -  x  -  -  -  -  Hung configuring timer/router FPGA or initializing FIR chip



   x  -  -  x  -  -  -  -  Hung loading DMA.bin



   -  x  -  x  -  -  -  -  Hung setting DMA speed\



   x  x  -  x  -  -  -  -  Hung scanning SCSI bus (or configuring DMA FPGA)



   -  -  x  x  -  -  -  -  Hung loading AUD.bin



   x  -  x  x  -  -  -  -  Hung configuring Audio FPGA



   -  x  x  x  -  -  -  -  Hung loading AL.bin



   x  x  x  x  -  -  -  -  Hung configuring Aligner FPGA



   -  -  -  -  x  -  -  -  Hung loading DSP.bin





   x  -  -  -  x  -  -  -  Hung programming DSP



   -  x  -  -  x  -  -  -  Hung loading ME.bin



   x  x  -  -  x  -  -  -  Hung storing ME data



   -  -  x  -  x  -  -  -  Hung loading PE.bin



   x  -  x  -  x  -  -  -  Hung storing PE data



   -  x  x  -  x  -  -  -  Hung loading MD.bin



   x  x  x  -  x  -  -  -  Hung storing MD data



   -  -  -  x  x  -  -  -  Hung loading PD.bin



   x  -  -  x  x  -  -  -  Hung storing PD data



   -  x  -  x  x  -  -  -  (Succeeded)



   SCANNING INDICATES COMPLETELY CONFIGURED



   1  2  3  4  5  6  7  8



  Completely configured Special Indicators (v4.0)



   1  2  3  4  5  6  7  8

   -  -  -  -  -  -  -  x

  This LED indicates that the Flyer has no video sync.
  Audio and video recording/playback will be unreliable.
  Caused by Toaster putting out illegal video on Main.
  This usually occurs when the Toaster software is being
  started, and when the Flyer is transitioning between
  play and record modes (entering or leaving the record
  panel).


   1  2  3  4  5  6  7  8

   -  -  -  -  -  -  x  -



   This LED changes for every character
  received from Flyer serial ports A or B.  This can be
  used for checking cabling and jumpers when setting up
  a serial device such as a time-code reader.  Should
  flash when receiving time-code information.


 1  2  3  4  5  6  7  8

 -  -  -  -  -  x  -  - Unused