Issue: Before Feb. 17, 1996, the Adaptec SCSI SCAM Controller Cards (part number CTRSCS003AB/ACWW) were shipped without the PLUG and PLAY SCAM option enabled in CMOS. Enabling the Plug and Play option will allow the system to see multiple SCSI hard drives.Resolution: Configure the system to recognize multiple SCSI hard drive. Perform the following setup procedures:
- Press CTRL-A when prompted upon boot.
- Highlight Configure/View Host Adapter Settings from the list of options, and press Enter.
- Highlight Advanced Configuration Options from the list of options, and press Enter.
- Highlight PLUG and PLAY SCAM SUPPORT from the list of options, and press Enter.
- Press Enter, choose ENABLED, and press Enter.
- Press ESC.
- Press ESC.
- Choose YES to save changes.
- Press ESC.
- Choose YES to exit the program.
- Press any key to reboot the system on the next screen.
The information in these articles is provided "as-is" without warranty of any kind, and all warranties are hereby disclaimed, whether express or implied, including, without limitation, the implied warranties of merchantability, fitness for a particular purpose and non-infringement. Gateway 2000 will not be liable for any damages whatsoever, whether direct, special, indirect, incidental, or consequential (including, without limitation, damages for loss of business profits, business interruption, loss of business information, or any other pecuniary loss) arising out of, or related to your use of, or inability to use the information in any such article,even if advised of the possibility of such damages. Because some states and jurisdictions do not allow the exclusion or limitation of liability for consequential or incidental damages, the above limitation may not apply to you. You may not further distribute, reproduce, rent, sell, transfer or license these articles.
If our documentation hasn't helped you,
this might be a good time to
send an e-mail to Technical Support.