Colorbook^TM II BIOS Does Not Remember CRT ONLY Setting After Memory Checked

Issue: When setting the Colorbook II up for CRT ONLY in the BIOS (2310-11, 3.02.00) the Colorbook II will display video on the LCD and CRT screens after the memory is checked. This issue does not occur with BIOS 2310-09, 3.01.01.
Resolution: BIOS 3.02.01 corrects this issue. BIOS 3.02.01 is located on the Gateway 2000^® FTP site for downloading.
The information in these articles is provided "as-is" without warranty of any kind, and all warranties are hereby disclaimed, whether express or implied, including, without limitation, the implied warranties of merchantability, fitness for a particular purpose and non-infringement. Gateway 2000 will not be liable for any damages whatsoever, whether direct, special, indirect, incidental, or consequential (including, without limitation, damages for loss of business profits, business interruption, loss of business information, or any other pecuniary loss) arising out of, or related to your use of, or inability to use the information in any such article,even if advised of the possibility of such damages. Because some states and jurisdictions do not allow the exclusion or limitation of liability for consequential or incidental damages, the above limitation may not apply to you. You may not further distribute, reproduce, rent, sell, transfer or license these articles.

If our documentation hasn't helped you,
this might be a good time to
send an e-mail to Technical Support.

ColorbookTM II BIOS Does Not Remember CRT ONLY Setting After Memory Checked

Colorbook^TM II BIOS Does Not Remember CRT ONLY Setting After Memory Checked