Issue: The Fujitsu FM10304/8 PCMCIA Network Card, while in use with Gateway Solo systems with Windows 95, will not connect to a network. This is because the card is set up for Memory Address 000CA000-000CAFFF.

Resolution: The customer may upgrade to BIOS 1.07. This BIOS (SOLOB107.EXE) is available for downloading from the Gateway 2000^® FTP site.Once the BIOS is flashed, it will set the card up at the new Memory Address 000CC000-000CCFFF. The system will recognize the card and operate properly.

The information in these articles is provided "as-is" without warranty of any kind, and all warranties are hereby disclaimed, whether express or implied, including, without limitation, the implied warranties of merchantability, fitness for a particular purpose and non-infringement. Gateway 2000 will not be liable for any damages whatsoever, whether direct, special, indirect, incidental, or consequential (including, without limitation, damages for loss of business profits, business interruption, loss of business information, or any other pecuniary loss) arising out of, or related to your use of, or inability to use the information in any such article,even if advised of the possibility of such damages. Because some states and jurisdictions do not allow the exclusion or limitation of liability for consequential or incidental damages, the above limitation may not apply to you. You may not further distribute, reproduce, rent, sell, transfer or license these articles.

If our documentation hasn't helped you,
this might be a good time to
send an e-mail to Technical Support.

Copyright © 1996 Gateway 2000 Inc. All rights reserved.
Please see our Legal Information. Please send feedback to Webmaster Central.