Windows 95 Installation

1. At the Windows 95 Desktop screen, insert the Data Race PCMCIA Etherlink card in either the top or the bottom PCMCIA slot. As Windows 95 recognizes the card, the New Hardware Wizard starts. The New Hardware Found screen appears. Note: If the Windows 95 cabinet files are not loaded onto your hard drive, an Insert Disk Window Appears. Insert your Windows 95 CD-ROM, and click the OK button to continue.
2. Next, a Copying Files window appears. In the Copy File From box, type:

   D:\WIN95

   then click the OK button in the upper right hand side of the window. The Copying Files window re-appears displaying the appropriate files being copied to the hard drive.
3. After the system finishes copying files, the System Settings Change window appears. Click the Yes button to restart the computer. As the system reboots and enters Windows 95, the Enter Network Password screen appears. Click the Cancel button.
4. Right click the My Computer icon, and click the word Properties from the pulldown menu.
5. Across the top of the System Properties screen are four tabs: General, Device Manager, Hardware Profiles, and Performance. Click the Device Manager tab to view this information.
6. In the upper left hand corner of Device Manager, by default, the View devices by type option is bulleted. From the list of devices previewed in the window, click once on the + symbol beside Network Adapters. Click the icon labeled NatSemi NE 4100 infomover or compatible to highlight it.
7. Click the Properties button at the bottom of the Device Manager window. The 3 COM Etherlink III screen appears with two tabs at the top of the screen: General, and Resources. Click the General tab. In the Device Status box, a message should appear that states This device is working properly. The network card is functioning properly and the installation of the Data Race PCMCIA Ethernet card is now complete.

Connecting to a Windows 95 Network

1. At the Windows 95 desktop, Right click on the Network Neighborhood icon located on the left hand side of the screen. Click the word Properties from the pulldown menu.
2. Across the top of the Network window are three tabs: Configuration, Identification, and Access Control. Click the Identification tab. In the Computer Name box, type a unique name for your individual computer. In the Workgroup box, type the workgroup name or the workgroup you want to be a part of. In the Computer Description box, type a unique description that separates your computer from someone else’s computer name. Click the OK button at the bottom of this window to continue.
3. Double click the Network Neighborhood icon, this allows you to view and connect to other users on your workgroup. Note: IF your workgroup is not listed, double click the Entire Network to view all workstations and workgroups.

Connecting to a Windows NT Domain

1. At the Windows 95 desktop, Right click on the Network Neighborhood icon located on the left hand side of the screen. Click the word Properties from the pulldown menu.
2. Across the top of the Network window are three tabs: Configuration, Identification, and Access Control. Click on the Configuration tab. In the box labeled, The following network components are installed, the following protocols are listed:

   Client for Microsoft Networks
   Client for Netware Networks
   NatSemi NE 4100 infomover or compatible
   IPX/SPX-compatible Protocol
   NetBEUI
   

3. In the box labeled, Primary Network Logon, click the down arrow to the right of this box. From the pulldown menu, click the Client for Microsoft Networks selection.
4. Click the File and Print Sharing button located in the lower center of the network window. A File and Print Sharing window appears.
   • If you want to share the files on your computer - Click the box beside I want to be able to give other access to my computer to place a check mark.
   • If you want to share your printer - Click the box beside I want to be able to allow others to print to my printers to place a check mark.
   Once you make your selections, click the OK button at the bottom of the window.
5. In the box labeled, The following network components are installed:, click once on Client for Microsoft Networks to highlight it. Click the Properties button located in the center right of this window.
6. The Client for Microsoft Network window appears. In the upper section labeled Logon validation, click the box beside Log on to NT Domain to place a check mark. In box labeled Windows NT Domain, type the name of the domain you are trying to connect to. Click the OK button at the bottom of this window. After returning to the Client for Microsoft Network screen, click the OK button at the bottom to continue.
7. If the Windows 95 cabinet files are not loaded onto your hard drive, an Insert Disk window appears. Insert your Windows 95 CD-ROM, and press the OK button to continue. Next, a Copying Files window appears. In the Copy File From box, type:

   D:\WIN95

   then click the OK button in the upper right hand side of the window. The Copying Files window re-appears displaying the appropriate files being copied to the hard drive.
8. The system asks to restart the computer. Click the Yes button to restart the system. As the computer restarts, the Enter Network Password screen appears. Enter a user name and password (if needed) to logon to the Network.
9. Once Windows 95 has finished booting, double click the Network Neighborhood Icon on the Windows 95 desktop to verify the system can see the server. Note: If your domain server is not listed, double click Entire Network to view all clients and servers.

Configuring Windows 95 to connect to a Novell server

1. At the Windows 95 desktop, Right click on the Network Neighborhood icon located on the left hand side of the screen. Click the word Properties from the pulldown menu.
2. Across the top of the Network window are three tabs: Configuration, Identification, and Access Control. Click on the Configuration tab. In the box labeled, The following network components are installed, the following protocols are listed:

   Client for Microsoft Networks
   Client for Netware Networks
   NatSemi NE 4100 infomover or compatible
   IPX/SPX-compatible Protocol
   NetBEUI
   

3. In the box labeled Primary Network Logon, click the down arrow on the right hand side. From the pulldown menu, click the Client for Netware Networks selection.
4. Click the File and Print Sharing button located in the lower center of the network window. A File and Print Sharing window appears.
   • If you want to share the files on your computer - Click the box beside I want to be able to give other access to my computer to place a check mark.
   • If you want to share your printer - Click the box beside I want to be able to allow others to print to my printers to place a check mark.
   Once you make your selections, click the OK button at the bottom of the window.
5. In the box labeled The following network components are installed, click once on Client for Netware Networks to highlight it. Click the Properties button located in the center right of this window.
6. Across the top of the Client for Netware Network window are two tabs: Advanced and General. Click the General tab. In the box labeled Preferred server, type the name of the server you are trying to connect to. In the box labeled First network drive, type the drive letter used as a connection. Place a check in the box beside Enable logon script processing. Click the OK button twice.
7. If the Windows 95 cabinet files are not loaded onto your hard drive, an Insert Disk window appears. Insert your Windows 95 CD-ROM, and press the OK button to continue. Next, a Copying Files window appears. In the Copy File From box, type:

   D:\WIN95

   then click the OK button in the upper right hand side of the window. The Copying Files window re-appears displaying the appropriate files being copied to the hard drive.
8. The system asks to restart the computer. Click Yes to restart the system. As the computer restarts, the Enter Network Password screen will appear. Enter a user name and password (if needed) to logon to the Network.
9. Once Windows 95 has finished booting, double click the Network Neighborhood Icon on the Windows 95 desktop to verify the system can see other computers on the network.

   The information in these articles is provided "as-is" without warranty of any kind, and all warranties are hereby disclaimed, whether express or implied, including, without limitation, the implied warranties of merchantability, fitness for a particular purpose and non-infringement. GATEWAY 2000 will not be liable for any damages whatsoever, whether direct, special, indirect, incidental, or consequential (including, without limitation, damages for loss of business profits, business interruption, loss of business information, or any other pecuniary loss) arising out of, or related to your use of, or inability to use the information in any such article,even if advised of the possibility of such damages. Because some states and jurisdictions do not allow the exclusion or limitation of liability for consequential or incidental damages, the above limitation may not apply to you. You may not further distribute, reproduce, rent, sell, transfer or license these articles.
   

   If our documentation hasn't helped you,
   this might be a good time to
   send an e-mail to Technical Support.

Copyright © 1996 Gateway 2000 Inc. All rights reserved.
Please see our Legal Information. Please send feedback to Webmaster Central.