FEATURES Specifications are subject to change without notice or obligation.

Bell 212A and 103 data modes Supports true hot swapping Recognizes carrier, dial tone, busy signal 33.6bps** Data/ 14.4bps Fax UL and CSA approved Supports extended AT command set and S-registers Supports touch-tone and pulse dialing Ringer equivalence: 0.8B US Telephone cable included Cellular Upgrade Coupon (Offers the cables necessary to enable the modem to work with a cellular phone) PCMCIA compliance PCMCIA 2.10 compliant Modem Standards Bell 103, Bell 212A, Hayes AT command set, ITU V.21, ITU V.22, ITU V.22bis, ITU-T V.22bis, ITU V.23, ITU V.32, ITU V.32bis, V.FC Fax Standards ITU-T V.17, TIU-T V.21 Channel 2, ITU-T V.27ter, ITU-TV.29, ITU-T Group III, EAI Class Iand II Protocols ITU V.42, ITU V.42bis, MNP levels 2-5, ETC, MNP 10EC Power requirements 160mA operating, 20mA sleep Operating modes Asynchronous, AutoSync, Full duplex, Automatic and manual call originate/answer Dialing capability Touch tone and rotary pulse Make-to-break ratio 39/60% (U.S.) Pulse dialing rate 10 pulses/second Receive sensitivity -9 to -43 dBM Tones detected All North American and most European telephone networks: dial, busy, ringback, modem Note: Incompatible tones include blind dialing based on timeout periods Line requirements Public-switched telephone network, including international connections, private unconditioned leased lines, public cellular telephone network Diagnostics Local analog loopback, local digital loopback, remote digital loopback, local interface loopback **Maximum data transfer rate dependent on certain variables including particular modems with which you are communicating, telephone lines, communications software, and communications protocols. Many Gateway 2000 products are custom engineered to Gateway 2000 specifications, which may vary from the retail versions of the software and/or hardware in functionality, performance or compatibility. Please ask your sales rep to explain any differences. The information in this document has been carefully checked and is believed to be accurate. However, Gateway 2000 assumes no responsibility for any inaccuracies that may be contained in this document. In no event will Gateway 2000 be liable for direct, indirect, special, incidental, or consequential damages resulting from any defect or omission, even if advised of the possibility of such damages.

Copyright © 1996 Gateway 2000 Inc. All rights reserved.
Please see our Legal Information. Please send feedback to Webmaster Central.